Skip to content
+1 (786) 571 0217 Get a quote

BlogAmazon FBA

FNSKU Labels Explained: Size, Placement and Printing

By the ProShip3PL team6 min read

Short answer

An FNSKU is the barcode Amazon uses to tie a unit to your listing and your seller account. It goes on every unit that is not tracked by the manufacturer barcode. Print it between 1 by 2 inches and 2 by 3 inches, in black on white non-reflective stock, and place it flat on the outside of the package with every other barcode covered.

FNSKU stands for Fulfillment Network Stock Keeping Unit. It is the code Amazon uses inside its warehouses to know which listing a unit belongs to, and whose it is. If you send inventory to FBA, you will print and stick more of these labels than any other.

What an FNSKU is

When you create an FBA listing, Amazon assigns it an FNSKU. For products that use the Amazon barcode it is a ten-character code that usually starts with X00. It is printed as a barcode on a small label, and that label goes on every unit you send in.

The FNSKU is tied to three things at once: the product, its condition and your seller account. That is why two sellers of the same product have different FNSKUs, and why a unit that carries the wrong label is received as the wrong product.

FNSKU, UPC, ASIN and SKU

Four codes describe the same product, and they are easy to mix up.

CodeWho issues itWhat it identifies
UPC or EANGS1, through the brandThe product, wherever it is sold
ASINAmazonThe product page in Amazon's catalog
SKUYouYour own stock code for your offer
FNSKUAmazonYour units of that product inside Amazon's warehouses

When a unit needs the Amazon barcode

Amazon tracks inventory in one of two ways: by the manufacturer barcode already printed on the package, or by its own barcode. You need the Amazon barcode whenever the listing is not tracked by the manufacturer barcode. Amazon's list also includes:

  • Used items and anything not in new condition.
  • Media, such as books.
  • Products with no scannable barcode.
  • Restricted products and dangerous goods.
  • Consumable or topical products, such as skin creams, shampoos and cosmetics.

If you are not sure which setting a listing has, look at its barcode type in Seller Central before you print anything.

What is printed on the label

  • The barcode.
  • The FNSKU in plain text under it.
  • The product name. Amazon shortens long titles to fit.
  • The condition, for example "New".

Print the file Amazon gives you as it is. Stretching it to fill a bigger label changes the width of the bars, and a scanner reads widths.

Size, paper and printer

  • Size. Between 1 and 2 inches tall and between 2 and 3 inches wide. The 30-per-sheet address label (1 by 2 5/8 inches) and the 2.25 by 1.25 inch thermal label are both inside the range.
  • Stock. White, non-reflective, with an adhesive back. Glossy labels bounce the scanner's light back.
  • Ink. Black only.
  • Printer. Amazon recommends a laser printer at 300 DPI. Thermal label printers are also widely used. Inkjet prints can smear when a carton gets damp.
  • Condition. Every label has to be a clean original. Amazon does not accept photocopied or damaged labels.

Leave the white margin around the barcode alone. Scanners use that empty space to find where the code starts and ends.

Where the label goes

  • On a flat surface of the package. Not across a corner, an edge, a curve or a seam.
  • On the outside. If the unit is in a poly bag or in bubble wrap, the label goes on the bag or the wrap, where it can be scanned without opening anything.
  • Over the original barcode when the unit has no extra packaging. The UPC, EAN or ISBN must not be scannable once the FNSKU is on.
  • Never over a Transparency code. Those have to stay visible.
  • Not over an expiration date or a safety warning that the customer needs to see.

A round bottle has no flat side. Turn the label so that the bars are stacked like the rungs of a ladder. The scanner then reads along the straight side of the bottle and not around its curve, where part of the code would be out of sight.

Mistakes that cost sellers money

  • The wrong label on the right product. A scanner trusts the label, not what is in the bag. This happens most with variations: the same shirt in two sizes, the same tumbler in two colors. The customer orders black and receives blue.
  • Two barcodes showing. If the original UPC and the FNSKU can both be scanned, the unit can be received under either one.
  • A label over a seam. When the carton or the bag is opened, the barcode is cut in half.
  • A label inside a wrinkled bag. Glare and folds stop the scan. Put the label on the outside.
  • Faded or smeared print. Low toner, a worn thermal head or inkjet ink.
  • Glossy tape over the barcode. The glare can stop a scanner from reading it.

The fix for the first one is simple and slow: scan each unit after it is labeled and compare the result with the product in your hand.

How we label at ProShip3PL

The FNSKU itself always comes from your Seller Central account. You send us the label files or the shipping plan. We apply each label over the original barcode and scan every unit to verify it, so a mix-up between two variations is caught at our bench and not by your customer.

Labeling is one step of our Amazon FBA prep, along with inspection, poly bagging, bundling and case packing. If the product is a set, it is built at our kitting bench first and labeled as one unit. For everything else Amazon asks for before a shipment arrives, see the guide to FBA prep requirements.

Rather hand the labeling over? See our FNSKU labeling service.

Questions sellers ask

What size is an FNSKU label?

Amazon accepts item labels between 1 and 2 inches tall and between 2 and 3 inches wide. Two common sizes inside that range are the 30-per-sheet address label, 1 by 2 5/8 inches, and the 2.25 by 1.25 inch thermal label.

Can I use the UPC instead of an FNSKU?

Only if the listing is set to track inventory by the manufacturer barcode. Amazon decides which products qualify, so check the barcode type of each listing in Seller Central before you ship.

Where do I get my FNSKU labels?

From your Seller Central account. You can print item labels for an FBA listing from your inventory page, or while you create a shipment. A prep center cannot invent an FNSKU. It prints the ones your account generates.

Does every item inside a multipack need its own label?

No. The label goes on the unit you sell, which is the outside of the pack. The barcodes on the items inside have to be covered or hidden so that only the label of the pack can be scanned.

Rules last checkedNovember 2026. Amazon updates its requirements, so confirm the current version in Seller Central before you ship.SourcesAmazon: FBA prep, packaging, and labeling guide

FromProShip3PL8871 NW 102nd St, Medley, FL 33178

Ship toYour businessReply within one business day

We label every unit.

Tell us what you sell. We reply with per-unit pricing within one business day.

Priced per unit