Amazon requires a poly bag to be transparent, at least 1.5 mil thick, completely sealed, and no more than 3 inches larger than the product inside. If the opening is 5 inches or wider, the bag must carry a suffocation warning. The barcode has to scan through the bag or sit on the outside of it.
A poly bag is the cheapest piece of FBA prep and one of the easiest to get wrong. The rules are short. Each one exists because a bag that is too thin, too big or left open causes a problem somewhere between the receiving dock and the customer.
Which products need a poly bag
Amazon asks for a poly bag when the product could be damaged by dust or handling, could leak, or could come apart. Its list includes:
- Apparel, fabric and other textiles.
- Plush toys and baby products.
- Liquids, as a second barrier in case the container leaks.
- Powders, pellets and granules.
- Jewelry and other small items that would get lost in a bin.
- Products whose retail packaging has holes or perforations.
- Sets and bundles that are not held together by a box.
Fragile items and glass need bubble wrap or a protective box, not just a bag. Sharp items have to be packed so that no edge or point is exposed. For the full picture of what each product type needs, see the guide to FBA prep requirements.
The six rules for the bag
- Transparent. The receiver has to see what is inside.
- At least 1.5 mil thick. Thinner film tears on conveyors and in bins.
- Completely sealed. Heat sealed or closed with its own adhesive strip. A folded flap does not count.
- No more than 3 inches larger than the product. Extra plastic catches in the machinery.
- A suffocation warning when the opening is 5 inches or wider, measured with the bag lying flat.
- A barcode that scans. Either it reads through the bag, or the label is on the outside.
The suffocation warning
A typical warning reads:
Warning: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or playpens. This bag is not a toy.
The warning can be printed on the bag or put on as a label. It has to be easy to see and easy to read. Amazon also sets a minimum print size for the warning, listed with its packaging requirements in Seller Central. If you buy bags with the warning already printed, check the print size against that page.
Put the warning where the product does not hide it, and do not stick the FNSKU label on top of it.
How to measure a bag
Lay the bag flat. The opening is the width of the open end, edge to edge. If that width is 5 inches or more, the bag needs the warning.
For size, put the product in, seal the bag and lay it flat again. The empty plastic beyond the product should be 3 inches or less. If it is more, use a smaller bag or fold the extra back and seal it down.
Mistakes that send units back
- Bags that are too thin. The bags a factory uses for dust protection are often under 1.5 mil. Ask your supplier for the thickness in writing.
- Bags left open. A flap tucked in or held by one piece of tape is not sealed.
- Colored or frosted bags. The rule is transparent.
- No warning on a large bag. Self-seal bags bought in bulk often come with no print at all.
- A barcode nobody can scan. A label inside a wrinkled bag, or behind a seam, reads as no label.
- Several items in one bag with no set label. A receiver may open the bag and count each item as a separate unit.
Bag, bubble wrap or box
| Use | When the risk is | Examples |
|---|---|---|
| Poly bag | Dust, dirt, leaks or loose parts | T-shirts, plush toys, pouches of powder, small accessories |
| Bubble wrap | Breaking or denting | Glass jars, ceramics, items with thin plastic parts |
| Box | Crushing, or sharp edges | Knives, tools, framed items |
Some products need two of these. A glass bottle of liquid is wrapped against breaking and bagged against leaking.
Sets in poly bags
When a bag holds several items sold as one unit, add a set label on the outside: "Sold as set", "Ready to ship" or "This is a set. Do not separate." Cover the barcodes of the individual items, and put the one barcode of the set on the outside of the bag. More on this in what kitting is and how it works. We build and bag sets as part of our kitting and repacking service.
How we bag at ProShip3PL
Poly bagging is one line on our Amazon FBA prep list. We add poly bags with warning labels, bubble wrap or shrink wrap where Amazon requires them, then apply the FNSKU label on the outside and scan every unit to verify it. Turnaround is 24 to 48 hours after your inventory arrives in Medley, Florida, and bagging is priced per unit.
If the label is the part you are unsure about, read the FNSKU label guide next.
Rather hand the bagging over? See our poly bagging service.
Questions sellers ask
Does a poly bag need a suffocation warning if the opening is under 5 inches?
Amazon's rule applies to bags with an opening of 5 inches or more. Several U.S. states have bag warning laws of their own, so many sellers buy pre-printed warning bags in every size and stop thinking about it.
Can I use the bag my supplier already put the product in?
Yes, if it meets every rule: transparent, 1.5 mil or thicker, completely sealed, the right size and printed with the warning where one is needed. Many factory bags fail on thickness or are simply folded shut.
Does the FNSKU label go inside or outside the bag?
Outside is the safe answer. A label inside the bag is acceptable only if it scans cleanly through the plastic, and wrinkles and glare often get in the way.
What does 1.5 mil mean?
A mil is one thousandth of an inch, so 1.5 mil is 0.0015 inch, or about 0.038 millimeter. It measures how thick the plastic film is. A mil is not a millimeter: a bag 1 millimeter thick would be about 26 times thicker than the rule asks for.
Rules last checkedNovember 2026. Amazon updates its requirements, so confirm the current version in Seller Central before you ship.SourcesAmazon: FBA prep, packaging, and labeling guide
