The right bag thickness, a compliant suffocation warning, a seal that survives transit, and the FNSKU applied outside where it scans — poly bagging is simple work with expensive failure modes. ProShip3PL bags, bubble-wraps and shrink-wraps inventory to Amazon's packaging requirements in Miami, FL, verified before any carton closes, in 24–48 hours.
Bagging failures are rarely exotic. The same five mistakes account for most flagged shipments: bags too thin for the product's weight, missing or undersized suffocation warnings, labels sealed inside the bag, loose bags that shift and tear in transit, and products bagged that also needed cushioning. All five are process problems — solved by a line that does the steps in the right order, every time.
Our packaging line runs a fixed sequence: the unit is inspected, matched to the correct bag size from stock, bagged and sealed, warning verified, then labeled on the outside and scanned. The scan is the gate — no scan, no carton. It's unglamorous discipline, and it's why bagged shipments from this floor check in without drama.
| Requirement | How we handle it |
|---|---|
| Bag transparency & thickness | Clear bags, 1.5 mil minimum, fitted from a full size range in stock |
| Suffocation warnings (5″+ openings) | Pre-printed compliant warnings — never an add-on sticker afterthought |
| Seal integrity | Sealed to survive Amazon's conveyor and bin handling, not just the truck |
| Barcode scannability | FNSKU applied outside, after bagging, scan-verified per unit |
| Fragile items | Bubble wrap or bag-plus-bubble, decided per SKU at receiving |
One packaging method doesn't fit all SKUs. Each product gets the treatment its category and fragility actually require.
Fitted clear bags with suffocation warnings for apparel, textiles, loose goods and anything Amazon requires contained.
Glass, ceramic and breakables wrapped to survive drop handling — with bag-plus-bubble combinations where both rules apply.
Multi-piece sets and loose-lidded boxes secured as one unit, labeled on the wrap so they scan as a single sellable item.
Damaged or non-compliant retail packaging replaced or reinforced so the product inside stays sellable.
Sealed retail boxes often need nothing — we bag what the rules require and skip what they don't, so you're not paying for pointless plastic.
Bagging slots into the same 24–48h flow as FNSKU labeling and bundling — one pass, one turnaround.
Each SKU checked against Amazon's current packaging matrix — bag, bubble, shrink, both, or nothing.
Fitted bag, compliant warning, transit-grade seal — or the cushioning the product's fragility demands.
FNSKU applied on the packaging's flattest face after sealing, never trapped inside.
Every unit scan-verified; only verified units make it into an Amazon-bound carton.
Unbagged garments absorb every odor between the factory and the buyer. Bagging at our dock — after the sea leg — is the fix bagging at the factory can't provide.
Usually factory bags with no printed warning. We re-bag the batch in warning-printed stock and the problem is structurally gone, not patched.
Leak-prone SKUs get seal checks at receiving plus bag containment, so one failed cap doesn't contaminate a whole carton at Amazon.
Over-packaging costs money and annoys buyers. We audit which SKUs genuinely need containment under Amazon's rules and strip the rest.
Broadly: anything loose, granular or powdered; apparel, textiles and plush items that dust or moisture could damage; items sold without their own sealed retail packaging; and products that could leak, shed or spill. Amazon's category-specific packaging requirements govern the details — we check each SKU against the current rules at receiving rather than guessing.
Per Amazon's packaging requirements, poly bags with an opening of 5 inches or more (measured flat) must display a suffocation warning — printed on the bag or applied as a label — in a prominent location, in legible type sized to the bag. Bags we use for affected SKUs come pre-printed with compliant warnings, so this is never a separate step or risk.
Amazon requires bags to be at least 1.5 mil thick and transparent, with a barcode scannable through the bag or applied on the outside. Thin, cloudy or torn bags are treated as unprepped. We stock compliant bags in a full size range so each product gets a properly fitted bag, not a folded-over compromise.
Outside — always applied after bagging. A barcode sealed inside a bag with print, tissue or product behind it scans unreliably at Amazon's receive stations. Our line sequence is fixed: inspect, bag, seal, then label on the bag's flattest face and scan-verify. Order of operations is half of packaging compliance.
Bubble wrap is for fragility, not containment: glass, ceramics, liquids in breakable containers, and anything that fails a drop without cushioning. Some SKUs need both — bagged for containment, then bubble-wrapped for protection. We decide per SKU at receiving, and if your product has failed at Amazon before, tell us — we'll over-spec the protection.
Yes. Shrink wrap suits multi-piece sets that must stay together, boxed products with loose lids, and items whose retail packaging would otherwise open in transit. It's applied tight enough to secure but not distort packaging, and the FNSKU goes on the wrap so the unit scans as one.
Often not, if the retail package is sealed, protects the product, and doesn't leak or shed. But perforated boxes, open-window packaging, and anything with a powder or liquid inside usually still needs a bag or wrap. We assess the actual retail unit at receiving and bag only what Amazon's rules genuinely require — you shouldn't pay for packaging that isn't needed.
Since Amazon discontinued its own prep services in 2026, there's no re-bagging safety net at the fulfillment center: non-compliant units risk receiving delays, stranded inventory, and loss of reimbursement eligibility if damaged. That's exactly why our packaging step ends with a verification pass before cartons seal — compliance is checked here, not discovered there.
Yes — apparel is one of the highest-volume bagging categories on our floor. Garments are folded to a consistent presentation, bagged in fitted clear bags with suffocation warnings where required, and labeled on the outside. Folded-and-bagged consistency also matters for returns: a neat unit is likelier to be judged resellable.
Tell us about your products through the form — materials, sizes, current packaging, monthly units. We'll reply within one business day with per-unit packaging pricing and a recommendation for which protection each SKU actually needs.
Describe your products — materials, sizes, how they're packaged now — and we'll reply within one business day with per-unit pricing and a packaging recommendation per SKU. Ship inventory from anywhere; it leaves compliant.
