Skip to content
+1 (786) 571 0217 Get a quote

BlogAmazon FBA

Supplier or Prep Center: Who Should Do Your FBA Prep?

By the ProShip3PL team6 min read

Short answer

Let your supplier do the FBA prep when the product is simple, comes from one factory, and the factory follows a written spec. Use a prep center in the United States when you buy from several suppliers, sell bundles, are based abroad, or want the goods inspected before Amazon sees them. Since January 1, 2026 Amazon does neither job for you.

Since January 1, 2026 Amazon no longer bags, wraps or labels FBA inventory in the United States. Every unit has to arrive ready for the shelf, so somebody else does the work. For most sellers the real choice is between the factory that makes the product and a prep center in the United States.

This guide compares the two. If you want the change itself first, read what Amazon ended and what it means for your shipments.

Supplier prep and a prep center, side by side

QuestionPrep by your supplierPrep at a U.S. prep center
Who checks the work before Amazon?Nobody, unless you pay for an inspection at the factoryThe prep center, when the goods arrive
What does it cost?Often a small charge per unit, added to the product priceA price per unit, plus the freight to the prep center
How fast does stock reach Amazon?Fastest. The goods can go from the port straight to AmazonOne stop longer
Can it combine products from several factories?No. Each factory preps only what it makesYes. Bundles and multipacks are built in one place
Who counts the delivery?Amazon, when it receives the shipmentThe prep center, against your purchase order
Where does extra stock wait?All of it goes to AmazonReserve stock stays in storage
What if a batch is prepped wrong?It is found at Amazon's dockIt is fixed before the goods go to Amazon

Why the choice carries more weight now

When Amazon ended its prep service, it also said that inventory shipped without the required prep and labels would not be eligible for reimbursement if it is damaged or cannot be traced. The older consequences still apply too. A unit that cannot be scanned cannot be received, and inventory that does not meet the packaging rules can be refused, sent back or disposed of at your expense.

So the question is no longer only who is cheapest. It is who catches a mistake before Amazon does.

When supplier prep is enough

  • The product is simple: one unit, one label, one bag at most.
  • Everything in the shipment comes from one factory.
  • The factory has prepped for Amazon before and works to a written spec.
  • You see photos of finished units, or pay for an inspection, before the goods ship.

What to put in the supplier's spec

Many factories will label and bag for a small charge. It works when you tell them exactly what you want. Send a written spec that covers:

  • The label file for each product, the label size, and where on the package it goes.
  • Which existing barcodes have to be covered.
  • The bag: transparent, 1.5 mil or thicker, sealed, with a printed suffocation warning.
  • How sets are packed and what the set label says.
  • Units per carton, the 50 lb carton limit, and where the carton labels go.

Ask for photos of the first finished units and the first packed carton before the rest of the batch is done. Factory poly bags are often thinner than 1.5 mil, and labels printed on an office inkjet can smear in transit. Every rule the spec has to meet is in the guide to FBA prep requirements.

Even with a good spec, the first person to check the factory's work is an Amazon receiver. That is the gap a prep center fills.

When a prep center is the better answer

  • You buy from more than one supplier and want every product prepared to the same standard.
  • You sell bundles or multipacks made from products that come from different factories.
  • You are outside the United States and need a U.S. address to ship to, and to receive Amazon removal orders.
  • You want the goods counted and inspected before Amazon counts them.
  • You do not want to send everything to Amazon at once. Reserve stock can wait in storage and go to Amazon as it is needed.

A prep center is not automatically good. These ten questions tell you which ones are.

Using both

The two are not exclusive. Many sellers have the factory apply labels and bags, then route the goods through a prep center that counts the delivery, checks the units and fixes what is wrong before anything goes to Amazon. The factory does the repetitive work, and somebody in the United States still looks at the result.

What about prepping it yourself?

It works when volumes are small and you have the space, the time and a place in the United States to do it. The cost is your own hours, and a mislabeled batch is yours to fix. It stops working when those hours are worth more to you than the per-unit price of handing the work over.

How to hand prep over without stalling your shipments

  1. List your products and write next to each one what it needs: a label only, a bag, bubble wrap, a bundle.
  2. Decide for each product who does the work, the supplier or a prep center.
  3. Get your label files from Seller Central. The FNSKU label guide explains the sizes and the placement.
  4. Send the prep center your purchase order or packing list, so the delivery can be counted against it.
  5. Route the next inbound shipment to the prep center instead of to Amazon.
  6. Create the FBA shipment with the prep center as the ship-from address, and pass on the box labels.
  7. Review the count and the photos. Then the shipment goes to Amazon.

How we handle it at ProShip3PL

Our warehouse is in Medley, Florida. Containers, pallets and parcels arrive at our dock, and we count every unit against your purchase order the day it lands. If a carton is short or damaged, you get photos the same day.

Then we do the work Amazon used to do, and the checking it never did: inspection, FNSKU labels, poly bags and bubble wrap, bundles, case packing and box labels. Shipments leave for the fulfillment centers Amazon assigns within 24 to 48 hours of your inventory arriving. Everything is priced per unit.

Stock you are not ready to send can stay on our racks, and we prep and ship it when Amazon needs it. See Amazon FBA prep, receiving and storage.

For the change itself and a step-by-step plan, read Amazon's 2026 prep change and the plan for sellers.

Questions sellers ask

Is it cheaper to have my supplier do the FBA prep?

Per unit, often yes, because the factory already has the workers and the materials on the line. The comparison changes when a batch is prepped wrong. A mistake made at the factory is found at Amazon's dock, where inventory can be refused, sent back or disposed of at your expense.

Can I use my supplier and a prep center together?

Yes. Many sellers have the factory apply labels and bags, then send the goods to a prep center in the United States that counts the delivery, checks the units and corrects what is wrong before the shipment goes to Amazon.

Do I still need to label products that already have a UPC?

Only if the listing is not tracked by the manufacturer barcode. Check the barcode setting of each listing in Seller Central. If it uses the Amazon barcode, every unit needs an FNSKU label, and you or your prep partner have to apply it.

Is a prep center the same as a 3PL?

Not always. A prep center gets inventory ready for Amazon. A 3PL also stores it and ships orders from your other sales channels. Some companies, including ProShip3PL, do both under one roof.

Rules last checkedNovember 2026. Amazon updates its requirements, so confirm the current version in Seller Central before you ship.SourcesSupply Chain Dive: Amazon to end FBA prep, labeling services in US

FromProShip3PL8871 NW 102nd St, Medley, FL 33178

Ship toYour businessReply within one business day

Let us be the checkpoint.

Tell us what you sell. We reply with per-unit pricing within one business day.

Priced per unit